SWG-25 manual pipe bender is a cold-style-type simple manual pipe bender. Filling sand and other processes without heating. Curved arc smooth, clear, distortion. Easy to use, easy to carry. Suitable for factories, mines, rural areas, chemical, refrigeration, construction, electrical wiring, pipe installation, is necessary for more than a common tool industry.
Model SWG-25
Bend range (mm) φ10-φ25
Configuration mold (mm) 10,12,1416,19,22,25
Pipe wall thickness (mm) 0.8-2.0
Weight (kg) 24
Size (cm) 65 × 20 × 16

This machine is shown in Figure 12 on the composition of the other pieces. Can bend Ф 10, Ф 12, Ф 14, Ф 16, Ф 19, Ф 22, Ф 25, a total of seven kinds of tube specifications, such as users with special needs can contact factory.
3, SWG-25 Manual pipe bending machine (manual bending device) to use
a) first fixed base 1.
b) according to the required pipe sizes and roller die.
c) use model heads into the shaft end of acne, then 2 sets of brackets into the shaft, then wheel 4 into the positioning block, 12 sets of bolts into a fixed. d) the support to roll plate 11, to bend the tube into the die and the roller between the adjustment nut 8, to die, tubes, wheel fit. You can turn the handle.