3-inch manual bending machine hydraulic bending machine with integral bracket SWG-3B
Output: 18T
Stroke: 320mm
Crimping range: 1 / 2 "-3"
Diameter: Φ22mm-Φ89mm
Configuration mold: 1 / 2 "3 / 4" 1 "11 / 4" 11 / 2 "2" 21 / 2 "3"
Pipe wall thickness :2.75-4 .5 mm
Weight: 92kg
Use range: Suitable for general pipes, conduits, gas pipes, thick steel pipe, the maximum bending angle of 90 degrees.
Molds are used ductile iron, gray cast iron than the average have a higher strength, good toughness and plastic, more resistant to use, easy to break.
|
