2-inch manual bending machine hydraulic bending machine with integral bracket SWG-2A
Output: 16T
Stroke: 240mm
Crimping range: 1 / 2 "-2"
Diameter: Φ22mm-Φ60mm
Configuration mold: 1 / 2 "3 / 4" 1 "11 / 4" 11 / 2 "2"
Pipe wall thickness :2.75-4 .5 mm
Weight: 46kg
Use range: Suitable for general pipes, conduits, gas pipes, thick steel pipe, the maximum bending angle of 90 degrees.
Molds are used ductile iron, gray cast iron than the average have a higher strength, good toughness and plastic, more resistant to use, easy to break.
|
