Mechanical cutting machine uses steel angle range can be cut angle ∠ 70 × 6: 30 °, 60 °, 45 ° angle
First, the use and application of portable mechanical angle cutting machine is my factory 89 years to the national electricity system, the drilling machine launched a new product after another. It is mainly used in power systems (engineering, maintenance, operation completed tower wood), telecommunications, geology, petroleum, construction and installation altitude operations, field construction and easy machine repair industry, in the absence of the power source under the condition of the cut angle.
Second, the performance characteristics of the aircraft with a compact, portable, safe, reliable, labor-saving, durable, flexible operation, and energy saving. Third, cut off the itinerary: 25mm; application of L70 × 6 below; Weight: 10 kg
Fourth, the operating instructions to angle into the gap between the two blades, the position to be cut on the good, the pressure angle of the screw down the spin, the angle pressed. Then continue to turn the pressure handle. The activities of the fixed blade constantly moving up to the roof will be cut off until the angle. Opposite the blade back program.
V. Notes
1. Do not use beyond the scope.
2. In the ministries should be checked before cutting off the screw is loose, the upper and lower blade gap no larger than 0.35 mm, if the gap is too large may be loosening two screws under the blade, copper pad or pad of paper pad, adjustment to the gap in the range of 0-0.3 mm cut off can be carried out within the |
